我們的主要產品是波長從650nm到1620nm具有不同譜帶的單模尾纖SLD模塊。
我們正在為不同的應用制造制冷(有制冷器和電熱調節器)和非制冷的模塊,像光纖陀螺儀、OCT、光纖組件測試、光計量學和大量的其它模塊。我們也提供自由空間模塊,特別是用于原子力顯微術,但也包括無斑紋照明、白光干涉測量、光學試驗和測量以及其它模塊。
Model number:SLD-56-MP
特征:
- medium power modules, three power categories,
- flat spectrum with very small residual Fabry-Perot modulation depth
- maximum -30 dB (reflectivity) parasitic secondary coherence subpeaks,
封裝:
DIL, BUT; others on request
應用:
- fiberoptic gyros
- fiberoptic sensors
- optical coherence tomography
- optical measurements
Additional & customized:
- PD - monitors
- PM fiber pigtails, polarized or Lyot-depolarized output
- FC/APC terminated pigtails
技術指標
Parameter |
Category |
Min |
Typ. |
Max |
Output power ex SM fiber, emitter @
+20 °C, SLD-561-MP modules |
MP1 |
0.35 |
0.5 |
- |
MP2 |
0.75 |
1.0 |
- |
MP3 |
1.5 |
2.0 |
- |
Forward current, mA
|
MP1 |
- |
- |
200 |
MP2 |
- |
- |
300 |
MP3 |
- |
- |
300 |
Forward voltage, V |
All |
- |
1.6 |
2.0 |
Peak wavelength, nm |
All |
1270 |
1300 |
1330 |
Spectrum width *, FWHM, nm |
All |
30 |
40 |
- |
Residual spectral modulation depth, % |
All |
- |
2.0 |
5.0 |
Secondary coherence subpeaks **, ( Reflectivity ), dB |
All |
- |
-40 |
-30 |
Operating temperature (case), °C
|
MP1 |
-55 |
- |
+80 |
MP2, 3 |
-55 |
|
+70 |
Cooler current, A |
All |
- |
- |
1.2 |
Cooler voltage, V |
All |
- |
- |
3.5 |
(* > 40 nm upon request)
(**Devices with secondary coherence subpeaks < -40 dB are available upon request)
Following marking should be used for ORDERING:
SLD-561-(b)-(c)-(d)-(e)
Where:
b = power category (MP1...MP3)
c = package type
d = SM (isotropic) or PM (polarization maintain) fiber (pigtailed versions only)
e = PD (if PD monitor is required)
Example: SLD-561-MP2-DBUT-SM |