SLD高功率寬帶光源模塊(800-870 nm高功率寬帶SLD光源模塊)
我們的主要產品是波長從650nm到1620nm具有不同譜帶的單模尾纖SLD模塊。
我們正在為不同的應用制造制冷(有制冷器和電熱調節器)和非制冷的模塊，像光纖陀螺儀、OCT、光纖組件測試、光計量學和大量的其它模塊。我們也提供自由空間模塊，特別是用于原子力顯微術，但也包括無斑紋照明、白光干涉測量、光學試驗和測量以及其它模塊。
Model number：SLD-37-HP
特征：
- 3 power categories: up to 25mW ex SM fiber SLDs with 50nm FWHM spectrum at 840 nm
- short coherence length
- negligible residual Fabry-Perot modulation depth
封裝：
- fiber coupled – Butterfly, DIL
- free space – TOW
應用：
- fiberoptic sensors
- Bragg grating sensors
- optical coherence tomography
- optical measurements
Additional & customized:
- PD - monitors
- FC/APC terminated pigtails
- PM pigtails (polarized or depolarized output emission ex PM- fiber)
|
Parameter |
Category |
Min |
Typ. |
Max |
|
Output power, mW, SM fiber pigtail,
SLD-371-HP
|
HP1 |
5 |
7.5 |
- |
|
HP2 |
10 |
15 |
- |
|
HP3 |
20 |
25 |
- |
|
Free space output power, mW, in
a cone N.A=0.71，
emitter @ +25 °C* |
HP1 |
10 |
15 |
- |
|
HP2 |
20 |
30 |
- |
|
HP3 |
40 |
50 |
- |
|
Forward current**, mA
|
HP1,2 |
- |
150 |
250 |
|
HP3 |
- |
275 |
350 |
|
Forward voltage, V |
All |
- |
- |
2.6 |
|
Central wavelength, nm |
All |
820 |
840 |
860 |
|
Spectrum width, FWHM, nm |
All |
45 |
50 |
- |
|
Residual spectral modulation depth, % |
All |
- |
2.0 |
5.0 |
|
Secondary coherence subpeaks
(Reflectivity), dB (10 log) |
All |
- |
-25 |
- |
|
Spectral flatness***, dB |
All |
|
|
2.0 |
|
Slow / fast polarization ratio
(PM polarized modules), dB**** |
All |
|
7.0 |
|
|
Operating temperature range****, °C |
All |
-55 |
- |
+80 |
|
Cooler current, A |
All |
- |
- |
1.2 |
|
Cooler voltage, V |
All |
- |
- |
3.5 |
* TOW packaged SLDs;
** current is specially adjusted to get highest output power with equal
intensity of spectral lobes; different for different modules;
*** Spectral Flatness parameter describes spectral intensity dropout
between spectral lobes;
**** LYOT depolarized versions are available upon request;
***** Butterfly packaged SLDs
SLD modules with similar outgoing parameters are available
at median wavelength 800 nm and 880 nm.
Following marking should be used for ORDERING:
SLD-37(a)-(b)-(c)-(d)-(e)
Where:
a = 0 (free space) or 1 (fiber pigtailed)
b = power category HP1, HP2 or HP3
c = package type
d = SM or PM (fiber coupled modules)
e = PD (if PD monitor is required)
Example: SLD-371-HP1-DIL-SM-PD
10-3 maximum feedback is allowed to run HP series SLDs safely at full power.
|
