|
我們的主要產品是波長從650nm到1620nm具有不同譜帶的單模尾纖SLD模塊。
我們正在為不同的應用制造制冷(有制冷器和電熱調節器)和非制冷的模塊，像光纖陀螺儀、OCT、光纖組件測試、光計量學和大量的其它模塊。我們也提供自由空間模塊，特別是用于原子力顯微術，但也包括無斑紋照明、白光干涉測量、光學試驗和測量以及其它模塊。
Model number：SLD-33-HP
特征：
- 3 power categories: an output power of up to 25mW ex SM fiber
and a spectral width (FWHM) of 50 nm
- short coherence length
- negligible residual Fabry-Perot modulation depth
封裝：
- fiber coupled – Butterfly, DIL
- free space – TOW
應用：
- fiberoptic sensors
- Bragg grating sensors
- optical coherence tomography
- optical measurements
Additional & customized:
- PD monitors
- FC/APC terminated pigtails
- PM pigtails (polarized or depolarized output emission ex PM fiber)
技術指標
|
Parameter |
Category |
Min |
Typ. |
Max |
|
Output power, mW, SM fiber
pigtail, SLD-331-HP
|
HP1 |
5 |
7.5 |
- |
|
HP2 |
10 |
15 |
- |
|
HP3 |
20 |
25 |
- |
|
Free space output power, mW, in
a cone N.A=0.71*
|
HP1 |
10 |
15 |
- |
|
HP2 |
20 |
30 |
- |
|
HP3 |
40 |
50 |
- |
|
Forward current †, mA
|
HP1 |
- |
190 |
230 |
|
HP2 |
- |
260 |
300 |
|
HP3 |
- |
350 |
400 |
|
Forward voltage, V |
All |
- |
- |
2.6 |
|
Central wavelength, nm |
All |
775 |
785 |
795 |
|
Spectrum width, FWHM, nm |
All |
40 |
50 |
- |
|
Residual spectral modulation depth, % |
All |
- |
2.5 |
5.0 |
|
Secondary coherence subpeaks
(Reflectivity), dB (10 log) |
All |
- |
-25 |
- |
|
Spectral flatness ‡, dB |
All |
- |
- |
2.0 |
|
Slow / fast polarization ratio **
(PM “polarized” modules), dB |
All |
- |
- |
2.0 |
|
Operating temperature ††, °C |
All |
-55 |
- |
+80 |
|
Cooler current, A |
|
- |
- |
1.2 |
|
Cooler voltage, V |
|
- |
- |
3.5 |
* TOW packaged SLDs;
† current is specially adjusted to get highest output power with equal intensity of
spectral lobes; different for different modules;
‡ Spectral Flatness parameter describes spectral intensity dropout between
spectral lobes;
** Pseudo-depolarized versions (light is launched into the fiber with its
polarization oriented at 45° to the birefringent axes) are available upon request;
†† Butterfly packaged SLDs.
Note: SLD spectra for the batches in stock are available upon request.
The following part numbers should be used when ordering:
SLD-33(a)-(b)-(c)-(d)-(e),
where: a – 0 (free space) or 1 (fiber pigtailed);
b – power category HP1, HP2 or HP3; c – package type;
d – SM or PM (fiber coupled modules); e – PD (if PD monitor is required).
Example: SLD-331-HP1-DIL-SM-PD.
A maximum feedback of 10−3 is allowed to run HP SLDs safely at full
power.
A lot of customized solutions are available — contact us with your detailed requirements!
|
